Leveling Feet for Phrozen Sonic Mighty 4K
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your resin printer isn't on a level surface, use this to level it.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 99
- Wydruki
- 1
- Wyświetlenia
- 441
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I made a nice enclosure for my resin printer. It has a built in air purifier, curing chamber, storage and wheels for me to roll it around. This last feature was great when I had it in a room with a nice level floor. Then I moved into a new room with a very wavy concrete floor. What to do? Design some adjustable leveling feet to put under the printer to bring it back to level.
I printed these at .2mm layer height on my FDM printer. The two pieces simple screw together I added some tolerance to the threads so they will work well.
The rubber feet of the Phrozen Sonic Mighty 4k fit into the top part of the foot. Fully closed the foot is 40mm tall. The screw thread is 20mm tall.
Use the STEP files if you have a printer that supports them. I've included STL files for slicers that don't.