organizer 220 x 100 x 110 mm - FreeCAD exercise
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saw this organizer on amazon and made one as a freecad exercise
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
TL;DR
Desk organizer like one i saw on amazon, freecad exercise
update 2023.0505
- added organic support
- added version with open bottom
Collection

Motivation
Learning by doing. Copycat something you see with your favoured CAD software is one of the best ways to train your skills. This take me less than an hour.
Let's get started
Have fun with the freecad source file or just use the ready to print STL files.
On reddit i was asked to give some help to make the box more easy to print. I added a 3mf file with organic support to ensure that support is on build plate only. Also i added a box version with an open bottom so you can use any kind of support if needed.
Very good calibrated printers may be able to print this bridges (114mm) without support. If you like to see how good your printer/filament setting can bridge, you can use the harp 120 tool to find out in less than 10 minutes:
https://www.printables.com/model/429565-harp-120-the-bridge-tool

Attribution
Can I sell copies of this?
Yes! Yahbluez shared this project under the GNU GPL v3.0 license. This license allows selling copies, but you must provide proper attribution and use the GPL 3.0 license, as detailed in the GPL v3.0 license itself. You have not the right to use any other licence than GNU GPL 3.0.
Donation
If you like to donate you can buy me a coffee
Filament used