1 / 8
Additionnal parts for Train car for OS-Railways done by Depronized
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed an axle and connecting rod for the Depronized design https://www.thingiverse.com/thing:3173055/comments
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 1054
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
I designed an axle and bearing to be able to mount the wheels and interface with the bogie sides. I also designed a connecting rod to attach the bogie centre hub with the bogie frame. To mount the wheel on the axle you need to local sand the axle with a sand paper. You can also enlarge the wheel hole also slightly.
Thanks again to Depronized for this very nice model. You can find all the other files at https://www.thingiverse.com/thing:3173055/comments