Bambu Labs X1 2 slot Plate Holder with spool adapter ring hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of a remix designed to hold two print plates and 4 spool ring adapters to the side of the printer.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 1149
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I only have two plates and one is always on the printer so six slots on the original seemed to be excessive for me. I don't ever see having that many, so I chopped off 4 of the slots and shortened the back plate to remove the excess space. I also shortened the connector bar accordingly.
I found the top/front support was not needed and it made it more difficult to slide the plates in so I did not include it in my models.
I also have to use the spool rings on any cardboard spools and have extras laying around, so I added a little stub to hang them from.
The addition of the spool stub does require to print with a small support.