A TP-Link Tapo C100 security camera mount for the Bambu Lab P1P (Bu Stik)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Bu Stik mount addon for the TP-Link Tapo C100 security camera.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 1506
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Thank @3DSourcerer and @BiTN_84310 for their ingenious designs - I only mixed @BiTN_84310's C100 GoPro mount with @3DSourcerer's awesome Bu Stik mounting system :)
So, a dirty Tinkercad remix to mount my Tapo C100 camera on the Bambu Lab P1P printer.
I got the GoPro mounts from each thing, I was just going to print both of them and screw them together like I would a GoPro. But why not cut out the extra joint.?
Also made it shorter to save some weight and gain stability.
The camera needs 9v, so I got one of those and the USB port on the P1P is enough to power the camera.
To hide the cable I grabbed @3DSourcerer's Cable Management Plate, but as the USB step-up converter is a little larger than a regular USB plug, it doesn't sit too flush, so I might shorten it a little.
I printed this in some generic black ABS. It was waiting for an enclosure, but I wear the pants in this house and so I used it against its will.
Turned out OK, probably brittle but who cares, works great.
Oh and don't forget to print the Bu Stik here, under “standard STLs”