Voronoi vase
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Decorative vase that is printed in 2 parts.
- Ocena
- 4,888 / 5
- Polubienia
- 5466
- Pobrania
- 16 676
- Wydruki
- 231
- Wyświetlenia
- 72 835
- Oceny
- 170
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
UPDATE 4:
Add pre-suported version of upper part use brim for adhesion.
UPDATE 3:
Updated to version 2 easier to print the bottom part.
Repaired 1 piece version, thanks for explaining the problem to sersch123
UPDATE 2:
Dual extrusion MMU version added.
UPDATE 1:
1 piece version added.
Decorative vase that is printed in 2 parts.
you can see my other designs in:
https://www.prusaprinters.org/es/social/47220-area3d/prints
Print instructions
The files are pre-configured just press slice and you will have everything ready to print.
The lower part only consists of an outer perimeter and an inner one without filling, since otherwise it will create artifacts that will spoil the surface.
In the upper part of the vase I have increased the z-hop to 0.8 so that when moving along the piece it does not break it.
If you experience problems with the part breaking due to hitting the nozzle, it may be caused by that particular filament expanding more than it should, this is very common in silky filaments.
IF THE NOZZLE HITS THE PIECE BREAKING IT, REDUCE THE EXTRUSION MULTIPLIER TO 0.95