1 / 1
Rudolph the Red Nose SNOWDOG (MMU) - Rough
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
[Update] Bugman has released a MMU version of Rudolph: https://www.prusaprinters.org/prints/47066-rudolph-the-red-…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 715
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (14)Powiązane
[Update]
Bugman has released a MMU version of Rudolph: https://www.prusaprinters.org/prints/47066-rudolph-the-red-nose-snowdog-mmu
It was pointed out that this was expected to be assembled post-print. It scratched an itch... so I assembled it in Microsoft 3D Builder and exported the parts.
This is "rough". It's not official and may not have good contact between all parts. I've included the Microsoft 3D Builder 3mf for modification if you want. (whole.3mf)