1 / 6
holder for Sage / Breville 54mm portafilter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
holder for 54mm portafilters with 3 prongs (sage or breville style)
- Ocena
- 3,5 / 5
- Polubienia
- 25
- Pobrania
- 142
- Wydruki
- 2
- Wyświetlenia
- 755
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (47)Powiązane
I designed this to hold on a vertical wall or on the side of the machine. works for 54mm portafilters with 3 prongs.
there are holes for 8x3mm round magnets. version in pictures has 5x2mm ones and was not strong enough to hold on the side of my machine.
I used it for my bambino, but should work on any machine with the same 54mm portafilter.
recommended settings: whatever works for you, but needs supports. print on larger flat side.