Stern Pinball - Mini wolverine model X-MEN LE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement wolverine model to fit on a stern xmen pinball that has been converted to use a newton ball. As…
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 1091
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement wolverine model to fit on a stern xmen pinball that has been converted to use a newton ball.
As I liked the model but I also liked the newton ball this is the best combination of both worlds.
To fit this on the newton ball mod I printed this so the X scale size was ~90mm or 110mm.
This meant it cleared the glass.
The wolverine claws need support.
Use tree supports work very well! (see pictures)
Enable support roof as this will assist with the claws aswell.
I used a brim. No raft.
zig zag infill
Wall line count 4. I did this so claws were solid.
Check your slicer preview and make sure its all solid!
I've also included an early version of the mount.
This fits inside the pop bumper and extends to hold wolverine over the newton ball cover.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.05
Infill:
30
Notes:
To fit this on the newton ball mod I printed this so the X scale size was 90mm.
This meant it cleared the glass.
The wolverine claws need support.
Use tree supports! I found these worked well (see pictures)
Enable support roof as this will assist with the claws aswell.
I used a brim. No raft.
zig zag infill
Wall line count 4. I did this so claws were solid.
Check your slicer preview and make sure its all solid!
Category: Mechanical Toys