1 / 4
WobbleX Interface for Voxelab Aquila C2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The WobbleX Ender 3 files don't match up with the Aquila C2's Z carriage holes, but that's actually a good thing!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 923
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
You bought a WobbleX for your Voxelab Aquila C2 and now you're looking for parts to put it all together. The official github has parts for the Ender 3, but that's not gonna work for the C2! Here's two options:
- V1 for anyone who has already converted their printer to direct drive.
- V2 for everyone else who is still using the factory bowden extruder (or anything similar). With V2, you can hang a motor so that the WobbleX has room to do its thing!
- The hanging extruder stepper motor mount idea was borrowed from tmackay (not a remix, but close enough).
- I've split the motor collar pin in two for easier printing.
- The solid half of the motor collar pin (the "rotation lock" part) has an extension that slips into a groove on the WobbleX Z carriage part, preventing the stepper motor from wiggling around.
- To use the factory stock Aquila extruder, you'll need to print a spacer plate (included below).
- You could turn the extruder 90 degrees to the left and probably still avoid colliding with the WobbleX. The “rotation lock” part should line up with another motor mount hole.
First three pictures are of V2, last picture is of V1.