1 / 9
Electrical box for Enclosure
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I just build an enclosure and I want put all the electronics place outside, made them quiet and cool, so I made a…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 1086
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (27)Powiązane
I just build an enclosure and I want put all the electronics place outside, made them quiet and cool, so I made a remix:
- It can be screw to an IKEA Lack table from bottom
- You have access from side to all your electronics if you need some maintenance work
- Made for 120 mm fan (a 80 mm fan / inside fixing would be better looking, but I had 120 mm on my stock)
- Made for RaPi4
- Made for SKR Mini E3 V2
- Made for 1x Relay
- Made for 2x XL4015 step down converter (one for the 5V - for RaPi, the other is for 12V - for LED/Fans)
- Support not need for printing
- For wiring please check the source of the remix
- Fan cover is used from here: https://www.thingiverse.com/thing:2802474
- The 3D printer wires go throught the IKEA Lack table with a cable guide: https://www.thingiverse.com/thing:2573459
- Made for my Ender 3, but it can used for any other 3D printer
- Some wood screw, M2,5, M3 screw and nuts needed
- Step file is included with all electronics component!
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Polymaker Polyflex PLA White
Category: 3D Printer Parts