1 / 3
AtomRC Killer Whale - Wing Root Endplate for JX9 Connector
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wing endplate to fit JX9 connector for AtomRC Killer Whale
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Wing root endplate for the AtomRC Killer Whale which allows you to mount a JX9 connector. The connector can be removed provided you don't glue the foam cover on top.
The original foam cover can be used but requires a small amount of trimming to fit, see pic. The JX9 connector can be attached using two M3x6 mm fixings.
Fusion 360 file is included if you want to make modifications!
Printing:
- Any material is fine, I used PLA
- The plates can be printed however you like, I suggest a standard 2 walls and 20% infill
- The STL is for the starboard wing, if you are slicing yourself then make a copy of the STL and mirror it in your slicer for port wing
Assembly:
- Sand the foam before gluing any of the plates in to improve adhesion
- You may need to trim small parts of the foam away to make the plate fit flush