RL200 Extruder Cover easy access V4.stl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have an RL200 & have used it for more than 2 months then you too will know the joys of taking the extruder…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
If you have an RL200 & have used it for more than 2 months then you too will know the joys of taking the extruder covers off for the umpteenth time.
I got so peeved I merged the two covers to try & make life easier, it did help alot
so here's my file.
There is a need for supports so make sure the gap between part & support
is healthy so the supports don't become welded on the part.
Print instructions
Category: 3D Printer Parts Summary
If you have an RL200 & have used it for more than 2 months then you too will know the joys of taking the extruder covers off for the umpteenth time.
I got so peeved I merged the two covers to try & make life easier, it did help alot
so here's my file.
There is a need for supports so make sure the gap between part & support
is healthy so the supports don't become welded on the part.
Print Settings
Printer: Rapid Lite 200
Rafts: Yes
Supports: Yes
Resolution: 0.2
Infill: 20-30%
Filament: PLA PLA How I Designed This
Tinkercad
I Merged the two parts for the extruder covers in Tinkercad