Waveshare 11.9 Inch LCD screen Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made a case for this screen. not Perfect but it works for me.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 246
- Wydruki
- 1
- Wyświetlenia
- 1768
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Made a case for this screen. not Perfect but it works for me. “11.9inch Capacitive Touch Screen LCD, 320×1480”.
you need some m2.5 screws (i used 8mm lenght for the case and 16mm for the legs)
also you need a flat hdmi cable. and a small micro usb cable since the hole for those are a bit small.
to print it in my MK3s i needed it to rotate it about 45 degrees. you need to enable supports. with the option “snug” supports and some other optimations for prining it needed about 10 hours to print at 0.20 layer height. if your print bed is larger you can print it different without printing those supports (can be done in about 6 hours)
also uploaded the file for fusion 360 so you can make changes yourself.