Ender 3 S1 Pro Ribbon Cable Support - Complete From Extruder to Base - Low Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Complete ribbon cable support system for the Ender 3 S1 Pro, directing the cable from the extruder to the base.
- Ocena
- 5 / 5
- Polubienia
- 108
- Pobrania
- 816
- Wydruki
- 9
- Wyświetlenia
- 3739
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Complete ribbon cable support system for the Ender 3 S1 Pro.
I wasn't a huge fan of the existing offerings for ribbon cable supports as they still put stress on the cable, especially when taking the cable in and out of the clip. The “Extruder Support” is my take on the standard ribbon cable clip to address that.
I also needed to minimize the footprint of my printer so I created some (admittedly overly complicated) brackets to twist the cable so it lays parallel to the base instead of perpendicular. This allows you to place the printer right up against a wall. The “Middle Support” replaces the stock ribbon cable clip on the Z axis. This part prints in 2 pieces for more simple printing; they should just slide/snap together with a slight amount of force. The "bottom support" clips into the channel on the Z extrusion so no hardware is required.
Printed in Overture Blue PETG.
"Extruder Support" and “Bottom Support” print with no supports.
“Middle Support” needs support in a couple of places for overhangs.
Please consider supporting the maker for the time/materials spend developing these parts.