4" Vinyl Siding Corner Bracket for Ubiquiti G4/G5 Cameras (Threaded Insert)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
10,64 € – 13,00 € netto (bez VAT)
Dla pliku: 4in_Siding_Corner_Bracket_Ubiquiti-G4G5_Cameras_0.15mm_PETG_MINI_13h9m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 11,82 € netto (środek widełek).
- Masa podana przez autora
- 129 g
- Czas druku podany przez autora
- 13,14 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 1254
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
4" Siding Mount for 2 Ubiquiti G4 Bullet or G5 Pro Cameras and others that use the same mount.
Big thanks to user PHOENlX for providing mount on Thingiverse.
https://www.thingiverse.com/thing:4930947
Print Settings
Printer Brand:
Prusa
Printer:
Prusa MINI
Rafts:
No
Supports:
Yes
Resolution:
0.15
Infill:
15%
Filament: Hatchbox PETG Bronze
Notes:
Printer: Prusa MINI
Slicer: PrusaSlicer-2.6.0-alpha6
Supports: Organic
Made infill around the inserts and mating point 100% infill for extra strength
Post-Printing
Threaded inserts used: x7 M4 x 6 x 7mm
Amazon link: https://www.amazon.com/dp/B07VFZWWXY
--
Hex socket bolts: x3 M4 x 12
Amazon link: https://www.amazon.com/dp/B07PHYJ8BB?th=1 (Closest to what I could find to what I bought awhile back)
Used a normal cheap soldering iron with its stock tip, pushed it straight in and held flush for about 1~2 minutes to (hopefully) allow the PETG to flow around the insert.
How I Designed This
Used Prusaslicer to modify the part from user PHOENlX's corner pipe holder to accompany the two cameras for this build. Unfortunately due to using Prusaslicer to modify the model, the part is unable to be saved as an STL as negative volumes are not able to be exported.
The model is cut in half in order to make it easier to mount high up rather than pushing it from the ground up as it is a tight fit. With the inserts being 6mm in diameter, I chose to use 5.90mm for the insert holes for there to be internal overflow between the straight ridges.