Bowser from Mario Games
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bowser, King Koopa files. You do NOT need MMU2 for this as the colors can be printed separately
- Ocena
- 4,905 / 5
- Polubienia
- 201
- Pobrania
- 955
- Wydruki
- 30
- Wyświetlenia
- 6034
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial
Bowser from Super Mario Bros games. This is NOT my model. I am bringing it from Thingverse and full credit goes to bpitanga for creating such an awesome print! I just wanted to bring it here to Printables. Original model by bpitanga can be found at: https://www.thingiverse.com/thing:2961384
No supports were needed, BUT in hindsight, I think it would have been better to combine the shell top & bottom, the shell border top & bottom, and the belly top & bottom, layed them flat, and printed with supports. This would eliminate the seams in these parts. If you have a MMU2 you could easily combine the shell and the shell border as well.
infill = 15% except for horns which were 20%
supports = no but see above
.2 mm