1 / 1
DIY MMU2S and MMU2+1S Modded Pulley Boday
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I've added the improved pulley body module and combined it with my own pulley body mod.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 3224
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 4)Remiksy (0)Kolekcje (50)Powiązane
I've added the improved pulley body module and combined it with my own pulley body mod. This is only for use if you're using the DIY MMU2+1S mods.
Print instructions
No supports needed. Print using PetG for longer lasting and use 25% to 40% infill.