1 / 5
52T Spur Gear for Tamiya DT-02 DT-03 — zdjęcie 1
1 / 5

52T Spur Gear for Tamiya DT-02 DT-03

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

52/19 tooth spur/drive gear for use with the Tamiya DT-02 and DT-03 gearbox. Design - I used the front suspension and…

Ocena
0 / 5
Polubienia
21
Pobrania
228
Wydruki
0
Wyświetlenia
1284
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

52/19 tooth spur/drive gear for use with the Tamiya DT-02 and DT-03 gearbox.

Design - I used the front suspension and rear suspension/gearbox unit to build a stock RC drag car, but wanted a higher top speed than the original gearing.

The 52t spur gear fits perfectly with a 20t pinion gear when the motor is mounted in the original 17t position.

Printed using Elegoo ABS-like grey resin mixed with Siraya Tech Tenacious resin. Print flat on the build plate then sand off the 2mm deep raft.

UPDATE: added a more detailed (larger file) STL of the 52T gear ... this version doesn't have te raft and is better suited to FDM printing.

Category: R/C Vehicles

Tagi