Needle roller for bubble wrap annihilation / popping
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I take issue with bubble wrap mailers and how bulky they are to compression, so I designed and made a spiky roller
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 477
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I recycle LDPE. I vacuum pack to compact these huge unsightly mailers and packaging tapes. But the bubble wrap mailers are non-compressible, unless popped. Thus I had an idea of a roller that pops every bubble with ease. Uses two 608 bearings and 800 size 8 pins ( https://amzn.to/428wjAQ ). This pops the bubbles at an industrial pace!
Printed in Marlon PLA on Prusa Mini 04 nozzle with 0.2 layer height.
The cone part (helper) is helping with a long task of inserting the needles. The inner cylinder locks these in-place. The little spacer are to be inserted between the inner cylinder and the bearing, ensuring that the inner of the bearing is unimpeded, ensuring smooth rolling action.
For handle I adapted great handle model from @SH_179939
Modeled in OpenScad.
This is not a toy, and will cause serious damage if used drunk or in careless fashion. Use at your own risk.