Slingshot replacements for Scared Stiff Pinball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The machine-unique slings from Scared Stiff Pinball
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
Mine broke, I came up with this as a temporary solution while I try to find originals.
Both the single extrusion and dual extrusion versions are works in progress. I've play-tested them in my games but there are little idiosyncrasies to both.
The cleanest version is single extruded onto a transparent material with PVA supports and then masked and painted. The post-holes need to be drilled and the reverse side near those post-holes in the bones could stand to be cleaned up more.
On the dual-extrusion version, I sometimes end up with a 1-2mm hole on the upper bone but I haven't figured out where that is in the model, yet. It doesn't happen on every print and could be might worn print-head.