Fast Printing Mask Ear Protection
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of those grooves the mask is digging into your ears?
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 184
- Wydruki
- 4
- Wyświetlenia
- 1026
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Tired of those grooves the mask is digging into your ears? With this incredible fast printing solution, wearing a mask has never been more confortable.
For more cool prints follow me on Intagram:
https://www.instagram.com/riot3dprint/
(@riot3dprint)
Print instructions
It is mandatory for this model to be printed with a 0.4 mm nozzle.
The BED needs to be almost PERFECTLY LEVELED for this one.
For best results adjust the layer witdth ("wall line width" - in cura) until you get only one perimeter in each layer. The model is calibrated for 0.4 mm, but the parameter might need some tweaking.
The layer height from the photos is 0.24 but you can bump it up to 0.28 to cut the time.
The print doesn't require a brim or suports.
The slicing tolerance is default (middle).