Kobra Go Beaglecam Zaxis Gantry Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mintion Beagle Cam z-axis mount for Kobra Go
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 905
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Printer: Anycubic Kobra Go
Orientation: Lay flat, see screenshot
Supports: Trees with Support Interface
Resolution: .16
Infill: 100% Concentric
Filament: Zirro Glow in the Dark Blue PLA
I have been searching for a good camera mount for the Beaglecam and my Kobra Go that I got for Christmas in 2022 and just could not find something that would work the way I wanted.
I was using a side mounted for it I could slide forward and back a few inches, which worked well, but I wanted something more permanent and cleaned up the way the printer looked. I also wanted a camera mounted to the z-axis to be able to focus on the top layer when doing time lapse video.
Decided I would jump in a little further into 3D printing and remix my first model. It uses the same M5 screws that come with the Kobra Go printer, which you can see in one of the pictures. Once mounted, there really isn't any shake or play on the camera when printing, and it doesn't seem to affect the gantry at all.
Here is the original camera mount I used: https://www.printables.com/model/278806-mintion-beagle-camera-swivel-arm-mount