Tefal Steamer Wall Holder DT9100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
simple and elegant wall holder for the Tefal Steamer DT9100 including pocket for accessories.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 133
- Wydruki
- 1
- Wyświetlenia
- 777
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Simple wall mounted holder for the Tefal DT9100 steamer. Would probably also fit similar Tefal steamers.
Remember to mirror the part if you want the steamer to face the other way.
IMPORTANT: The pictures and the presliced gcode is mirrored compared to the actual 3mf model uploaded. Be sure to check that the direction is the one you want before you print.
i uploaded two versions. The v2 model has a better fit since it cups the head properly. I left the old model that is just strait and more generic.
This holder pair nicely with this cable wrapper from @Telekineticyeti_2188 scaled ~140%
print settings
0.25 mm layer height
2 perimeters
10% infill
organic support material + paint on support auto generate
The hole in the back of the accessory department is for the organic support to grow from.