Rocky Paw Patrol Logo [Single Extruder, Multi color]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-color single extruder print for Rocky logo from Paw Patrol. Two files: one with text, the other without.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 471
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi
this model should be fairly easy to print. Can be glued to the wall or door of your kids room. If you like the model please leave a like and post an image! Thanks.
Idea:
The outer edge (and lettering) are raised +0.8mm while the recycling logo is only +0.4mm, allowing you to add 2 color-changes. You can also scale the model in X & Y but keep Z the same, allowing you to simply copy the following parameters.
Printing:
Layer height: 0.2mm
Color:
1) Start with green
2) Add color change at 2.2mm, switch to white
3) Add color change at 2.6mm, switch to grey/black/silver