Raspberry Pi4 in NES parts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are the printed parts needed to setup a raspberry pi inside an NES shell. No NES were harmed in the making of…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 586
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
These are the printed parts needed to setup a raspberry pi inside an NES shell. No NES were harmed in the making of this as the board was dead and other parts donated. Parts used: raspberry pi 4, usb c extension, micro hdmi adapter, 30mm fan, 4 port usb hub, petroblock powerblock usb c, screws used should be roughly 2mm diameter and 7mm long. I've included the inventor files if you need to alter the parts. Feel free to ask any questions about the setup
-Old project from 2020, after this I wired the control ports by splicing the wires from the original into usb to nes adapters, but would recommend going with petroblock's controlblock instead for power and controllers in one package.
Part links: https://www.amazon.com/gp/product/B00B2HORKE/ - micro hdmi adapter https://www.amazon.com/gp/product/B07QWQWQ5Y/ - usb c extension https://www.amazon.com/dp/B00XMD7KPU/ - USB hub https://www.petrockblock.com/product/powerblock/ - powerblock
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Supports:
Yes
Resolution:
0.15
Infill:
10%
Filament:
Category: Video Games