Internal light and power for moon lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed to fit this lamp: https://www.thingiverse.com/thing:2771919 by moononournation. It provides a support…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 504
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
-Old project from 2020, did not work very well. Would not really recommend
Designed to fit this lamp: https://www.thingiverse.com/thing:2771919 by moononournation. It provides a support structure to have leds and batteries completely inside the lamp. The two halves of the lamp connect to the center by small magnets. One downside is the 4mm of non-terrain surface from the mounts and the center. I plain to create a better version that will have the surface of the first 2mm of each half. Uses 2x 2 AA battery holders, 4 AA, one switch, 8 white LEDS, and 16 1x2mm round magnets. I will update this with the exact parts I bought.
Category: Other