1 / 5
Creality limit switch mount (press fit design)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple mount for the creality limit switches. I wanted to remove the belt cover from my Ender 3 and made this
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 405
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a simple mount for the creality limit switches. I wanted to remove the belt cover from my Ender 3 and needed a place to mount the x-axis limit switch. This uses M4 bolts and t-nuts to mount to the rail.
This prints quickly, requires minimal infill and no supports.
Notes:
- This is a press fit design and has .2mm clearances built in. You may need to adjust based on your personal calibration settings.
- I designed this to work with the micro swiss direct drive carriage. If you are using a different carriage you may need to modify.
Print Settings
Printer:
BIQU B1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament:
IDK PLABlack How I Designed This ===================
- Pulled full cad of ender 3 from github
- exported limit switch into STL using Fusion 360
- Used STL in tinkercad as a boolean subtraction, stretched by .2mm in x/y to allow for tolerance
- Tweaked size and hole locations in revisions
Category: 3D Printer Parts