Magpul AFG Clone - Picatinny Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magpul AFG Clone - Picatinny Rail with M4x25mm Horizontal Rail Securing
- Ocena
- 4,8 / 5
- Polubienia
- 262
- Pobrania
- 1267
- Wydruki
- 5
- Wyświetlenia
- 3842
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Print this with supports to the build plate only to handle bridging on the underside of the p-rail attachment area. PETG or PLA+ recommended for durability and heat resistance.
Affixing AFG to Picatinny Rail:
Vertically, you can affix this to a full P-rail that has pre-drilled mounting holes with an M4-.70 x 10mm bolt and nut. Elongated nuts are preferred as they are not as hard to hold in place and prevent from spinning when tightening.
Horizontally, you can affix this with an M4-.70mm x 25mm bolt and hex nut. with the model holding the nut in place due to the hex indention.