Cross Stitch / Embroidery Bobbin Winder for Drill
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the bobbin holder portion of Josh_Your_IT_Guy's hand winder machine. Designed to be used in a drill chuck.
- Ocena
- 0 / 5
- Polubienia
- 71
- Pobrania
- 289
- Wydruki
- 0
- Wyświetlenia
- 1364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
Wife had used other makeshift tools and borrowed my drill once to make winding her bobbins quicker. Saw this on Printables, and the hand winding looked great, she wanted one that could be chucked into the drill for her uses. Made it longer, added a tiny nub where the hole typically is on the bobbin inside the holder. Very snug. Printed originally in PETG using a .6mm nozzle, but there's nothing complex or material specific. Noted that it seemed to print better “nose down” than the other way around, to prevent the chuck portion from snapping. May require minor clean up internally for the best fit and to make the bobbins easier to remove.