1 / 1
Laser Engraver Part Alignment Jig
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Useful for engraving multiple identical pieces to help maintain position and alignment.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 152
- Wydruki
- 0
- Wyświetlenia
- 768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (34)Powiązane
I needed a jig / guide to help place bookmark blanks in the same position for engraving. Double sided tape can be used to hold it down to the waste board.
Inner edges measure 40mm and 100mm and have a relief cut to allow a snug fit into the corner.