1 / 3
Brompton Cable Fender Disc — zdjęcie 1
1 / 3

Brompton Cable Fender Disc

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Most Brompton come with fenders (L & R). If you adventurous and you want to convert yours to a E (no fenders and no…

Ocena
0 / 5
Polubienia
8
Pobrania
74
Wydruki
0
Wyświetlenia
598
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Most Brompton come with fenders (L & R). If you adventurous and you want to convert yours to a E (no fenders and no rack), you will need a cable fender disc (or fender cable disc; whatever you call it) to prevent the cables from rubbing against the wheel/tires. After looking online for a Brompton Fender Cable Disc STL file unsuccessfully, I decided to make one myself instead of buying one online.

Since Brompton comes from UK, it seems right to base it on the Union Jack. The hole is 5mm diameter x 6mm deep (including the round extension to reach the fork eyelet). The fork eyelet is slightly under 14mm from what I measured. The disc + eyelet comes up to approx 19mm+. This means a ~25mm M5 bolt should work fine.

As usual, these dimensions are best guess so YMMV.

You can choose your own infill % (I used 99%) and resolution (I used 0.12).

 

Tagi