Brickmaster 16XL
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Brickmaster System with 16 total outputs!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 121
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The original case for the Brickmaster control system. Brickmaster is a low-voltage switching system that uses MQTT, designed for integration with Home Assistant. Originally designed for controlling legos, hence the name!
My default build provides eight 5v and eight 9v outputs, and takes a 9v input. I use modular port blocks so ports can be rearranged without having to reprint the whole thing. 9v and 5v connectors are different, to prevent improper connections. Connectors friction fit very snugly into the modules.
Software
Available in this repo.
It's relatively reliable but can have glitches, so don't expect it to be rock-solid-production ready. Definitely DO NOT use for anything safety related.
Components
- Adafruit Metro M4
- Elegoo 8 channel relay board
- AW9523 GPIO extension board
- 50mm Semma QT cable
- QT to Dupont Male cable
- 5.5x2.1mm DC power jack
- 5.5x2.1 DC power right angle connector - For power to the Metro
- JST-XH connectors - 9V ports
- JST-PH connectors - 5V ports
- USB port - Optional, if you want or need a separate 5v power source, or to make easier updates.
Hardware
- 10 3mm x 10 screws
- 10 3mm nuts
- 8 2.5mm x 6mm standoffs
- 8 2.5mm x 10mm standoffs
- 10 2.5mm screws
Assembly
Some assembly instructions here, maybe, eventually.