LED light for 3D printer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this to fot standard prusa frame. It fits with led strip on aluminum , you can find those on ebay or…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I designed this to fot standard prusa frame. It fits with led strip on aluminum , you can find those on ebay or banggood . it plugs straight in to the 12V power supply and you can use jsut super glue , the frame will act as a heatsink so the LED will go on full brightnes and will be super cool wich is very good for it life.
you can buy it here or similar one this fits just right : http://www.banggood.com/6W-76led-COB-LED-Chip-520mA-WhiteWarm-White-For-DIY-DC-12V-p-960210.html?rmmds=myorder
Print Settings
Printer Brand:
RepRap
Printer:
Prusa i3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
25%
Notes:
ABS or PLA , doesnt matter
Post-Printing
ASSEMBLY
You can print it separated for easier printing wich is "rozdeleny" file . then you just glue it with acetone or CA glue. but acetone is better if it is ABS . then glue in piece of aluminum foil but shiny side up so it reflects more light.
Category: 3D Printer Accessories