1 / 6
RC Transmitter to PC Gaming Device over the air via Betaflight — zdjęcie 1
1 / 6

RC Transmitter to PC Gaming Device over the air via Betaflight

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This box is used for mounting a 30x30 standard sized flight controller for use as a receiver for a Betaflight to USB…

Ocena
0 / 5
Polubienia
0
Pobrania
11
Wydruki
0
Wyświetlenia
165
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

This box is used for mounting a 30x30 standard sized flight controller for use as a receiver for a Betaflight to USB PC Gaming device.

Mount the flight controller as you normally would in a stack (don't need to care about soft mounting since the gyro is not used). Use a glob of hot snot or other adhesive to stick the nano receiver in (XM/XM+/RXSR/Nano ELRS, etc..).

Once this is built configure the receiver in Betaflight like you would when setting up your quad. Go to the command line and type "set usb_hid_cdc = on", save, and you're set!

Print Settings

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

15%

Filament: Any PLA/PETG Any


Notes:

Use 3 perimeter walls.

Category: R/C Vehicles

Tagi