High Performance Spool Holder for Prusa Lack Enclosure (up to 5kg Spools)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New and optimized ball bearing wheels for the original Prusa spool holder with minimum resistance and noise
- Ocena
- 4,75 / 5
- Polubienia
- 46
- Pobrania
- 267
- Wydruki
- 5
- Wyświetlenia
- 1575
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
These new wheels for the original Prusa Lack Enclosure Spool Holder consist of 608 ball bearings (22 mm x 7 mm). Unlike other solutions here the filament spool rolls directly on the metal bearing surface minimizing noise, friction and resistance.
Also suited for most larger spools up to 5 kg with max. rim width of 7 mm.
These wheels are a drop-in replacement for the original wheels. Mount with a M4x20 screw to fix the axle. The discs provide a small separator rim which must face towards the ball bearing.
The unmodified base for the holder is also included here for completeness.