1 / 4
UNI POSCA stand for 7 3M and 24 5M markers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Smooth stand for POSCA markers. This remix is for a combination of 7x 3M and 24x 5M markers.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 308
- Wydruki
- 1
- Wyświetlenia
- 1155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (51)Powiązane
Printing in normal orientation works great as long as you have good adhesion. No supports required. Brim recommended just in case.
I have included 3mf for painted seams and backwards orientation with rear seam alignment to minimize seam visibility. Please use this file at your own risk, as it might bring in some other printer-specific settings.
I used 5% Gyroid infill.