1 / 5
Electrolux / AEG Air Conditioner Dual Hose Upgrade — zdjęcie 1
1 / 5

Electrolux / AEG Air Conditioner Dual Hose Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of Foppemoa's model. The original filter can be used. Redesigned with FreeCAD from scratch.

Ocena
0 / 5
Polubienia
82
Pobrania
1070
Wydruki
2
Wyświetlenia
8112
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The model has the same dimensions as the one from Foppemoa, but you can use with this design the original filter.

My air conditioner is an Electrolux Chill Flex Gold (EXP26U758CW). The cover fits probably many more models of Electrolux or AEG. Check the dimensions of your air conditioner first before you print.

The adapter ring for the connector has larger notches and is a bit tighter, so the connector made by wejn will hold better. 

Parts:

  • There is a "Full" version if you have a large printer, needs probably a lot of support.
  • A split version with “Top” and “Bottom” where the panel is cut in half, recommended to print these part.
  • A ring where an Electrolux / AEG hose connector can be attached.
  • Alignment strips, recommended.

Post Print Split Version:

Glue the parts together with a fast hardener epoxy resin, it works great for PETG and PLA. You can use thick superglue too, but is not as strong. I recommend this epoxy resin: UHU Plus Quick Secure 45700

Tagi