Kona Electric EV Canadian Coin Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray for the centre console to hold Twonies, Loonies, quarters, nickels and dimes. Also has space for small items.…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 684
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
A tray for the centre console to hold Twonies, Loonies, quarters, nickels and dimes. Also has space for small items.
You may want to put black hockey tape or some other thin anti-slip tape on the back of the support ledges to protect the interior and prevent the tray from being able to slide forward/backwards.
In this initial design I missed the curve and angle at the back of the console. There is still plenty of support to hold it up.
Print in orientation shown in the photo and no supports are necessary.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
10-20%
Notes:
I used 10% infill for the lower layers where the coin holder is and 20% above that.
How I Designed This
Fusion 360
Category: Automotive