Wheel well templates for 1/10th and 1/12th RC Onroad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
42.25 mm template for 12th scale pan cars. 65.25 mm template for 10th scale touring cars. Slotted wheel chocks to…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 214
- Wydruki
- 0
- Wyświetlenia
- 764
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
42.25 mm template for 12th scale pan cars.
65.25 mm template for 10th scale touring cars.
Slotted wheel chocks to ensure accurate alignment of template on body.
Instructions for use:
With wheels on the car, mount body to correct height and trim the body to the ride height desired.
Slide template under a wheel with the template outside of the body and the body slid into the slot in the wheel chocks.
Using a marker, trace around the outside of the template on the body.
Using lexan scissors, cut out the wheel well. Sand if you want additional clearance or have some freaky lexan sanding fetish.
Print Settings
Printer Brand:
Creality
Printer:
CR-10S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Notes:
You will need supports in the slot in the wheel chocks.
Post-Printing
Remove the supports from the wheel chocks and you're ready to go.
How I Designed This
Fusion 360
Category: R/C Vehicles