LK1 / LK4 / LK5 Pro Dual Fan BLtouch Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As i didn't liked any available BLtouch bracket for the Dual Fan kit so i designed my own. I added an optional "Shield"…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 825
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
As i didn't like any available BLtouch brackets for the Longer LK5 Pro Dual Fan kit, i designed my own. I added an optional "Shield" to block the light of the led if you use a camera in front of the printer.
Keep in mind that if you want to modify it, to block the light from the side, this might have impact on the air flow as it's in front of the fan.
Rotate the light shield that the side with holes is flat one the build plate.
The bracket might be printed with a brim for better adhesion.
No supports required, 0.2 layer height, 20% infill
Print Settings
Printer:
Longer LK5 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Red / Matte Black
Notes:
Rotate the light shield that the side with holes is flat one the build plate.
The bracket might be printed with a brim for better adhesion.
Category: 3D Printer Accessories