Gridfinity Countersink Bit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Countersink bit holder. Tested on a Ryobi set. Fully adjustable in f360.
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 153
- Wydruki
- 4
- Wyświetlenia
- 610
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Simple countersink bit holder compatible with Gridfinity, made to be compact and stackable with other bins. Tested with a Ryobi set, fully adjustable. Grab the fusion file and adjust as you see fit.
Friction fit for 6x2mm magnets. Fusion 360 file to tweak the magnet holes, slot sizes, spacing etc as needed. Skipping the silly screw holes in addition to magnets saves tons of filament.
Adjust the R-Pattern or Extrude steps to tweak the depth/number of slots. Adjust the sketch to change other dimensions.
Supports: None
Infill: 10-15%
Credits
- To generate the bin base, I used the excellent FusionGridfinityGeneator by Le0Michine.
- Gridfinity is a design of Zack Freedman.