1 / 2
Box for the HomeBrew Gen. 3 by Mark Lord
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box for the HomeBrew Gen 3 accessory for Celestron telescopes' mounts
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 78
- Wydruki
- 0
- Wyświetlenia
- 499
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
A box designed for the Homebrew Gen. 3 accessory for Celestron mounts. See here for details:
https://www.cloudynights.com/topic/854327-homebrew-gen3-pcb-wifibtgpsmusbrelay/
I printed it in PETG. No screws needed, apart from #4 M2x8 to attach the OLED screen.
My OLED screen is a 0.96" SSD 1306 128x64, adjust it to the right size of your screen, or delete the hole if you don't want an OLED.