S9 Sculpfun Cyclonic Air Assist
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated 24 November 2023 (improved Thru hole and laser path) Hello Following the studies made on the high power CO2…
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 445
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Updated 24 November 2023 (improved Thru hole and laser path)
Hello
Following the studies made on the high power CO2 laser (Trumpf laser) I decided to apply the "Cyclonic" effect to my S9 laser.
The cyclonic design avoids interference in the airflow and therefore optimizes this for a maximum output efficiency by avoiding pressure drops.
It is the new S9 model which has a black metal insert to create an air assist effect (poor)
My S9 laser has a 19mm cavity that receives this insert.
My piece should also fit the older S9 models if you have a 19mm cavity.
The standard 4/6mm air tube is simply inserted into the head tube.
As usual, i designed this part keeping in mind the part MUST be easily printable and without supports ! Print them upside down (see picture)
After printing, make sure that the laser beam hole is clean and free of burrs. If it is not, the plastic may fuse and vaporise on the laser diode protection lens.
An O-ring is necessary to ensure that the nozzle is completely sealed with the laser output lens. https://s.click.aliexpress.com/e/_Aqjs3h
(ID=9mmOD=13mmCS=2mm)
As a simple return, please like if you love it and post a picture ! Thanks
Happy printing and laser cutting !
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.15
Infill:
15%
Filament: Prusa Prusament PETG
Category: Parts