1 / 6

Automag Key Mod rail

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FrankB

@FrankB_191084

For mounting on an AGD Automag. 4/10/20 - added variations for tighter fit to classic rail and for printing somewhat…

Ocena: 0 / 5
Polubienia: 1
Pobrania: 20
Wydruki: 0
Wyświetlenia: 168
Oceny: 0

Aktualizacja u źródła: 7 maj 2023

Informacje o modelu

Źródło: Printables
Kategoria: Other Ideas
Licencja: Creative Commons — Attribution

Szczegóły Pliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (4)

For mounting on an AGD Automag.

4/10/20 - added variations for tighter fit to classic rail and for printing somewhat easier in vertical. KeyMod holes still need patching in the two vertically slotted versions.

5/4/20 - KeyMod holes patched on flat sided version. Rail was lowered on flat sided version.

12/22/20 - added a beefier flat sided version with tilted keymod rail to look around the feed neck.

Print Settings

Printer:

Makerfarm Prusa i3

Rafts:

Supports:

Yes

Resolution:

0.2 - 0.3

Infill:

50+

Filament:

E3D ABS

Black

Notes:

The ABS shrinkage may be a feature in this case. Print horizontal or vertical. Horizontal is easier cleanup.

Post-Printing =============

Fitting

Holes are made to be tapped for 10-32 set screws. Use non-marring screws or use something in the holes to prevent marring the marker body. Bottom edges presently need some sanding to fit the classic rail, but keep rail contact to ensure stability.

Category: Other

Tagi

thingiverse