2D Cell to 18650
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 2D Cell to 18650 battery adapter. Designed to fit into a 2D Maglite but may work in other applications as well
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 152
- Wydruki
- 2
- Wyświetlenia
- 595
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a 2D Cell to 18650 battery adapter. Designed to fit into a 2D Maglite but may work in other applications as well.
The negative side is where the washer goes and that's what contacts the spring on the Maglite flashlight. The washers need to be 7/8" or larger to make contact with the cap spring.
Will need hardware below that's available at most any hardware store. I designed it for different screw sizes you might have.
2" #10 Screws
https://www.mcmaster.com/91440A205/
2" #8 Screws
https://www.mcmaster.com/91440A205/
2" #6 Screws
https://www.mcmaster.com/91440A159/
3/16" 1" Fender Washers
https://www.mcmaster.com/91090A120/