p3steel Lights
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
.... needed to pop a few lights on the p3steel just to jazz it up a little so this is it :) im not the best at…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
.... needed to pop a few lights on the p3steel just to jazz it up a little so this is it :) im not the best at designing so i have included all files i worked on so others can change or modify them. i used the cheap strip led's that come on a roll and just stuck them around the inside with the 12v wire running to the switch... the parts are just glued together in the centre and new holes need to be drilled in the frame, the top part was designed to be bigger and then filed on the top left and right to make it fit snug but im sure someone who knows what there doing can adjust this in the files :)
Category: 3D Printer Parts