CTC - Side SpoolHolder - with some features.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an easy to mount and fast to Print Spool holder. I was looking for an easy to install spoolholder that doesn't…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an easy to mount and fast to Print Spool holder.
I was looking for an easy to install spoolholder that doesn't harm the filament transport and fits any kind of Spools (for example: Small FlexiSmart spools- Picture 4)
The result was that i maked this one. Its stable, clean and fast to Print.
- Fast2Print (0.3mm - 25% infill -3 cells) = 55min
- 2 diffrent axis length to match the spool wide.
Feature Addons:
- Filamentguide support (i recommend it)
- Flexible spacer to fit any spoolwide
- Stackable, 3 Holder = 2 Spools,..
- Ball-bearing axis !
The Bearings are also easy to print and they works directly after printing :).
Print the bearings with 100% infill (you need two for one axis) without support and (if possible) without raft.
Work in progress..
- stand alone version
greetz
Print Settings
Printer:
CTC Dual
Rafts:
No
Supports:
No
Resolution:
0,3
Infill:
min 20%
Category: 3D Printing