1 / 2
Voron 2.4 Skirts with Hex infill.  250, 300 and 350mm sizes. — zdjęcie 1
1 / 2

Voron 2.4 Skirts with Hex infill. 250, 300 and 350mm sizes.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I remixed the default Voron 2.4 skirts, adding a hex pattern inside the original hex.

Ocena
5 / 5
Polubienia
319
Pobrania
1948
Wydruki
21
Wyświetlenia
8575
Oceny
15

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v3.0

I remixed the default Voron 2.4 skirts, adding a hex pattern inside the original hex.

I also remixed the fan mount skirt, adding the same hex pattern and reworking it to be mounted backwards.  The backwards mounting was necessary to allow the hex infill to print without a bunch of supports.  I also added an outward facing Voron logo.

 

The backwards mounting method will require 3 additional heat set inserts per fan.  The fans will need to be mounted with with 3 screws from the inside, and the fan grills mounted with the original threaded inserts.

 

To do multicolor prints with these models, you will need to swap filament at the appropriate layer. 

 

The 6020 fan blank allows you to keep the same look on each side, without having to install additional fans.

 

I created a fan grill specifically for the backwards fan support mod, in a seperate listing.