TronXY X5S series bed extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was made to fix an issue I had with mounting my 400x400 bed as the frame provided didn't fit. I left the base…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 165
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This was made to fix an issue I had with mounting my 400x400 bed as the frame provided didn't fit. I left the base without holes so you can adjust as required to locate the bed where needed to work with your frame. 2-4 M3x6 screws fit in the threaded holes for added tension to avoid sliding. I'm not 100% certain it'll work for all X5S type printers but it should allow you to upgrade or replace your existing bed to the 400 or 500mm
Added: V3 has thinner mount plate and 2 x holes that should make it easier to locate your bed. the slim design needs to be printed at 100% infill for rigidity also reduced the # of mounting holes to 2 as the top ones interfered with bed leveling
Category: 3D Printer Parts